# Z-Wave Networks: Adding/Removing the August Smart Lock Pro

> The August Smart Lock Pro is compatible with all commercial Z-Wave hubs like Wink, SmartThings and others. The instructions below provide steps to add...

Source: https://support.august.com/en_us/setting-up-z-wave-on-the-august-smart-lock-pro-S1Hxgw81CdM

Last updated: 2021-02-12T17:46:18.467Z

The [August Smart Lock Pro](https://august.com/products/august-smart-lock-pro-connect) is compatible with all commercial Z-Wave hubs like Wink, SmartThings and others. The instructions below provide steps to add August to or remove August from your Z-Wave Network. Select either Adding the Lock or Removing the Lock depending on what you want to do.

[Adding the Lock](#) [Removing the Lock](#)

## Adding the Lock

BEFORE YOU BEGIN: The August Smart Lock Pro must be set up and connected in the August App before adding it to the Z-Wave Network. Download and install the August Home app. Select "Get Started" from the home screen, or, if already logged in to the app, select "Set Up a Lock" from the main menu.

  

[![](https://drive.google.com/uc?id=15l7Vumvo4b4LsJ5iiJIxSmysYNfjB_fR)](https://itunes.apple.com/us/app/august-smart-lock/id648730592)

  

[![](https://drive.google.com/uc?id=15_n_XFX1P7Oc8JyyQw_lCZDbR18Alsrf)](https://play.google.com/store/apps/details?id=com.august.luna&hl=en)

  

Follow in-app instructions to complete set up.

To begin the inclusion process:

1.  Open the August App and navigate to **Lock Settings**
2.  Go to **Z-Wave Settings**. _The first time you perform this action the screen will state that “The Lock is not connected to a Z-Wave Network”_
3.  Tap **Add to a Z-Wave Network** and follow the instructions to begin the inclusion process.

The Z-Wave chip is enabled after the Inclusion Process begins. After you first select "Add to Z-Wave Network”, the Z-Wave chip looks for a firmware update. If an update is required, you must select that option to move forward. The firmware update process should take about 3-4 mins, during which time your phone should remain near the lock. Once completed, you will be prompted to put your hub into Inclusion Mode before continuing in the August App.

Return to your hub’s interface to continue adding your Smart Lock.

PLEASE NOTE: If your hub requires an app other than the August App to be put into Inclusion Mode, we recommend using two devices (i.e.: phones/tablets) during the pairing process - one for the lock and one for the hub.

If you are connecting to an S2 hub/gateway, it may ask you for a 5 digit Device Specific Key (DSK). This is found on the inside of your face plate, or on the retail serial label on the outside of the August Smart Lock Pro box.

## Removing the Lock

To remove your lock from a Z-Wave network: 

1.  Go to **Lock Settings** 
2.  Then to **Z-Wave Settings** 
3.  Select **Remove Z-Wave Device**.

On the next page, you will see two options:

*   "My Hub is in Learn Mode" - use this mode when you have a working hub and can properly disconnect.
*   "My Hub is No Longer Working" - if your hub is no longer functioning, use this mode to RESET the device.

Additional information about Z-Wave is available [here](https://support.august.com/z-wave-information-ByeMv8J0_z). Information about Z-Wave Plus Security is include in [this article](https://support.august.com/z-wave-plus-security-H1NJvLy0Of).

##### Related Products:

*   [Smart Lock Pro](https://august.com/products/august-smart-lock-pro-connect)

## Related Articles

##### What is Z-Wave Compatibility for August Smart Lock Pro?

August is proud to be the first S2 Z-Wave Plus smart lock certified by the Z-Wave Alliance. By incorporating Z-Wave technology, you can now connect your...

 [View more](https://support.august.com/z-wave-compatibility-HJlwIJRdz)  

##### Connecting Your Smart Lock Pro to a Wink Z-Wave Hub

We recommend using two separate mobile devices for the following steps: One for the Wink app; and one for the August App...

 [View more](https://support.august.com/connecting-your-smart-lock-pro-to-a-wink-z-wave-hub-S19JDUk0OG)  

##### How to Connect Your Smart Lock Pro to a SmartThings Z-Wave Hub

The following instructions are for the Generation 3 Smart Lock Pro and the SmartThings Classic app - The SmartThings Samsung Connect app is not yet compatib...

 [View more](https://support.august.com/connecting-your-smart-lock-pro-to-a-smartthings-z-wave-hub-HJzxxvIy0_f)